LD310
SPECIFICATION

LD310/80/7XX/YY/WH

Smooth appearance and line design; Up to 50,000 hours. Low maintenance cost; Can be installed horizontally and vertically; The Angle can be adjusted to ±15°; The protection grade is IP66, IK08; The drive box is opened without tools for easy maintenance. ADC12 high pressure casting aluminum shell, conducive to heat dissipation; High strength tempered glass lampshade with light transmission performance is stronger; TypeⅠ/Ⅱ/Ⅲ/Ⅳ/Ⅴ light distribution can meet the different requirements of road lighting.

LD310
Product data
General Information
Light source replaceable No
Number of gear units -
Driver/power unit/transformer Driver
Driver included Yes
Optic type Unsymmetric
Optical cover/lens type Tempered glass
Luminaire light beam spread TypeⅠ/Ⅱ/Ⅲ/Ⅳ/Ⅴ
Sensor socket Selectable
Cable length 0.2m(selectable)
Protection class IEC Safety class I
Certifications CE/CQC
Lifetime (hour) 50,000h
EU RoHS compliant Yes
Light source engine type LED
Operating and Electrical
Input power 80W
Input voltage 100-277Vac
Input frequency 50/60Hz
Current 0.8A max
THD <20%
Power factor (min) >0.97
Mechanical and Housing
Housing material Aluminum die cut
Reflector material -
Optical cover/lens material Polycarbonate/Tempered glass
Optical cover/lens finish Clear
Product dimensions (mm) 582*250*110
Product color White
Approval and Application
Ingress protection code IP66
Mech.impact protection code IK08
Initial Performance (IEC Compliant)
Initial luminous flux 10400Lm
Luminous flux tolerance +/-10%
Initial LED luminaire efficacy 130Lm/W
Init.Corr.Color Temperature 3000K/4000K/5000K/5700K
Init.Color Rendering Index >70
SCDM ≤5
Application Conditions
Ambient temperature range -40 to +50℃
Dimming -
Logistical Data
Order product name LD310/80/7XX/YY/WH
Net weight (piece) 5.2kg
Gross weight (piece) -
Packaging dimensions (mm) -
Packaging dimensions (inch) -
Packaging unit (piece) Folding carton box 1
Volumen(m³) -
Volumen(ft³) -
Application
Urban and residential pedestrian road Motorway/Bicycle lane Parking lot Parkway
Light Distribution & Spectum
Light60
Dimensional drawing
111
Accessories
Material Description
1 Light control device Light-operated switch
2 Short circuit cap
It acts as a temporary short connection
3 NEMA base 3PIN/5PIN/7PINOptional
4 NB/4G-CAT1/ZIGBEE intelligent controller Controllers of various communication modes are optional
5 60 to 80port Suitable for mounting light poles with a diameter of 80mm
6 60 to 40 port Suitable for mounting light poles with a diameter of 40mm
7 Shutdown switch The function of open cover break protection
*Plusrite does not give any representation or warranty as to the accuracy or completeness of the information included herein and shall not be liable for any action in reliance thereon. The information presented in this document is not intended as any commercial offer and does not form part of any quotation or contract, unless otherwise agreed by Plusrite. Plusrite is registered.