Product data
General Information
Light source replaceable
|
No
|
Number of gear units
|
A: 2 B: 4 C:4
|
Driver/power unit/transformer
|
Power supply unit
|
Driver included
|
Yes
|
Optic type
|
Symmetrical
|
Optical cover/lens type
|
Lens
|
Luminaire light beam spread
|
Type III/Type IV/Type V
|
Sensor socket
|
Z10/ZHAGA
|
Cable length
|
Cable 0.3 m without plug
|
Protection class IEC
|
Safety class I
|
Certifications
|
CE/cETLus/DLC/FCC
|
Lifetime (hour)
|
50,000h
|
EU RoHS compliant
|
Yes
|
Light source engine type
|
LED
|
Operating and Electrical
Input voltage
|
120-277V/120-347V/277-480V
|
Input frequency
|
50 or 60Hz
|
Current
|
0.91A(120-277V)/0.91A(120-347V)/0.4A(277-480V)
|
THD
|
<20%
|
Power factor (min)
|
0.95
|
Mechanical and Housing
Housing material
|
Aluminum die cut
|
Reflector material
|
-
|
Optical cover/lens material
|
Polycarbonate
|
Optical cover/lens finish
|
Clear
|
Product dimensions (mm)
|
360*307*66
|
Product dimensions (inch)
|
14.17*12.09*2.60
|
Product color
|
Bronze/Black/White
|
Approval and Application
Ingress protection code
|
IP66
|
Mech.impact protection code
|
IK08
|
Initial Performance (IEC Compliant)
Light output
|
8400lm-60W/11200lm-80W/14000lm-100W
|
Luminous flux to lerance
|
+/-10%
|
Efficacy
|
140lm/w
|
Init.Corr.Color Temperature
|
CCT3
|
Init.Color Rendering Index
|
>80
|
Initial input power
|
60/80/100W
|
Power consumotion tolerance
|
+/-10%
|
Application Conditions
Ambient temperature range
|
-40 to +50℃
|
Dimming
|
0-10V
|
Logistical Data
Order product name
|
ALS07/100/SW/8S3/YY/ZZ
|
Net weight (piece)
|
3.6kg/7.94lbs
|
Gross weight (piece)
|
4.3kg/9.48lbs
|
Packaging dimensions (mm)
|
350*105*420
|
Packaging dimensions (inch)
|
13.78*4.13*16.54
|
Packaging unit (piece)
|
Folding carton box 1
|
Volumen (m³)
|
0.015
|
Volumen (ft³)
|
0.53
|
Application
Landscape Lighting Pathway Lighting Perimeter Lighting Entryway Lighting
Light Distribution & Spectum
Dimensional drawing
Accessories
Material
|
Description
|
Lock Bolt
|
Lock bolt is used for securing a adjustable part of the lighting fixture in a desired position
|
Gasket
|
Gasket fills the space between two or more mating surfaces to prevent leakage from or into the joined objects while under compression
|
Wall Mount
|
Wall bracket helps to hold the lighting fuxture attached to the wall
|
Yoke Mount
|
Yoke mount allows for vertical or horizontal installation on a wall or a ceiling
|
Slip Fitter(MT-SAL/SF)
|
Slip fitter is for round light pole tenon mounting bracket for a single lighting fixture
|
Extruded Arm
|
Adjustable universal pole mount is for tube/pipe pole installation of the lighting fixture
|
Anti-Glare Shield
|
Anti-glare shield for SAL G7 series, with white/black/brozen finish.
|
Photecell
|
Electronic photocontrol, suit for SAL G7 series.
|
@ 2024 Plusrite All rights reserved. Plusrite does not give any representation or warranty as to the accuracy orcompleteness of the information included herein and shall not be liable for any action in reliance thereon. Theinformation presented in this document is not intended as any commercial offer and does not form part of anyquotation or contract, unless otherwise agreed by Plusrite.